• Welcome to the LegalBeagles Consumer and Legal Forum.
    Please Register to get the most out of the forum. Registration is free and only needs a username and email address.
    REGISTER
    Please do not post your full name, reference numbers or any identifiable details on the forum.

10 things you should do to a new PC before connecting it to the Internet

Collapse
Loading...
This thread is closed.
X
Important !
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 10 things you should do to a new PC before connecting it to the Internet

    A Microsoft Windows PC that has not been updated for security vulnerabilities will be compromised by some from of malware within minutes of connecting to the Internet. Take steps to protect yourself before you start Web surfing.

    10 things
    It is only natural, when you get a brand new PC, especially one with broadband capabilities built-in, you want to connect to the Internet and see it action. For many, the browser and the World Wide Web are the "killer-apps" of the modern PC—the Internet is what you have a PC for, everything else is just extra fluff.
    However, connecting to the Internet with a new unprotected and unpatched PC is practically inviting the nefarious and malicious to infect your PC. According to research published by Sophos in July 2005, there is about a 50 percent chance that an unpatched PC will be infected with malicious software within 12 minutes of connecting to the Internet. Once infected, it is almost impossible to get a PC clean again without completely re-installing the operating system. (We are restricting this conversation to Windows PCs for the moment.)
    To prevent the frustration that comes with re-installing Windows, you should take the necessary steps to update, configure, and patch your new PC. Keep in mind that no matter how new your PC is, it will most likely need patching and it will definitely need to be properly configured. Here are 10 basic things you should do before attaching the Internet to a new PC.

    Make a starter CD-ROM
    Before you disconnect your old computer, take a few minutes to burn a starter CD-ROM that contains the latest version of your favorite anti-virus software. I prefer to keep this simple and inexpensive by using AVG from Grisoft, but if you like Norton or McAfee those will work just as well.
    To save time later, you should put other security applications on this disk like Spybot Search & Destroy, AdAware, etc. It would also be a good idea to include any updated drivers you might need—drivers for your video card for example. Just like Windows, your video card drivers are likely to be a little old also. You should also put drivers on this disk for peripherals that you will be connecting to your new PC, like cameras, scanners, printers, and game interface devices. Having all of these device drivers residing on a single CD-ROM means you will not have to go to the Internet to retrieve them as you set up your new PC.

    Remove the promotional apps

    After going through the initial setup process where Windows identifies devices you may be asked to register and/or activate you copy of the Windows operating system—hold off on that for now, you can always do that later. This first thing to do is to clean up the mess that shipped in your PC. You should remove all of the promotional and trial software that you do not intend to use from your new PC. This is usually the first thing I do, because invariably one of those apps will ask if I want to activate it or register it—a process that usually involves accessing the Internet. (Some times they don't ask—they just assume I want them on my pristine PC). At this point you should have no connection to the Internet at all, wireless or not.
    The applications to be deleted are usually ISPs advertisements like AOL and Earthlink, an antivirus app from a competitor of your current application (something you should already have ready on your CD-ROM), trial versions of Money or Quickbooks, etc. If you are not going to use these, go to the Add/Remove Programs applet in the Control Panel and remove them completely.

    Install antivirus software
    Install the antivirus software that you burned onto a CD-ROM in step 1. The assumption is that any PC purchased after this document is published will have Windows XP SP2 installed, but if SP2 is not installed, you could have that update ready on your disk too. In fact, if you know how, you could have some of the more important Windows patches and updates on your disk also. This would be a good time to install anti-spyware software too.

    Turn on a software firewall

    Windows XP SP2 comes with a modest but still useful software firewall. Before you start surfing the Internet you should turn it on—or you can install an alternative third-party software firewall like Zone Alarm. Any alternative firewalls should have been included on the startup CD-ROM you made in Step 1.

    Install printers and other peripherals
    Before you connect to the Internet it is a good idea to install your other peripherals to your new PC. Performing this step means that when you do connect to the Windows update page, it will see your devices and make suggestions for new Microsoft-tested (WHQL) drivers if they are available

    Establish a password for the administrator account
    One of the most glaring security vulnerabilities in any new Windows-based PC is that it ships with a wide open administrator access to the root directory. You never want anyone but you to have unfettered access to the admin settings on your PC. And while a password could easily be bypassed by a skilled cracker, it will deter the less determined intruder

    Create a new user account with password

    This is almost as equally important as password protecting your administrator account. For general day-to-day activities, you do not want to be using your admin account. Instead, you should be using a user account that is also password protected (a password that is different than the one you are using for the admin account, please). This adds another layer of protection for your new PC because a user account does not have the same all-access permissions as an admin account. In some cases, malicious software will be thwarted by this level of permissions restriction alone.

    Turn off unnecessary Windows services
    Microsoft has been doing a better job of this with the release of SP2, but there are still numerous unnecessary Windows services and processes running by default on most PCs. If you'd like to see how many there are just perform the three finger salute (CTRL-ALT-Delete) click Task Manager and then the Processes tab. All of those applications, services, processes, etc. are operating in the background on your PC. The problem is that many can actually open access to your PC to the outside world without your knowledge or active consent. That access is usually justified for what the process is supposed to be doing, it is just that many times your PC doesn't need that process at all—Web servers, network messengers, debug gers—are all processes you probably don't need on your personal PC. (I will post info on these at a later date)

    Establish a system restore point
    Now that you have performed the first eight steps you should take a moment to establish a system restore point. To manually create a Restore Point, you launch the System Restore utility by clicking Start | All Programs | Accessories | System Tools | System Restore and then follow the steps in the wizard. This step will establish a fall back point if something happens to go haywire later.

    Install and configure a router
    This last step may seem like an unnecessary added expense to some, but in this age of viruses, worms, and other nasty Internet infections, a router standing between you and the outside world coming at you at broadband speeds offers another significant layer of protection. Connecting a PC directly to the Internet means that PC gets its own IP address, which means it can be seen by every sleazebag with malicious intent. By adding a router to your broadband setup, the router gets the visible IP address and gives your new PC an internal address. In addition, routers have hardware firewalls and other features that help block the bad guys before they get to your new PC.
    This is especially helpful because the first thing you should do when you do actually connect to the Internet is head directly for Windows Update. This is the most important tip in this guide—the only place you should be heading on the Web when you first connect you PC to the Internet is the Windows Update page. You will not have time to check movie times or football scores. The 12 minute countdown to possible infection starts as soon as you connect.
    .

  • #2
    Re: 10 things you should do to a new PC before connecting it to the Internet

    Wow...Thats great advice PK. Wish I'd done at least 7 of those things when I got my new lappy.
    "Although scalar fields are Lorentz scalars, they may transform nontrivially under other symmetries, such as flavour or isospin. For example, the pion is invariant under the restricted Lorentz group, but is an isospin triplet (meaning it transforms like a three component vector under the SU(2) isospin symmetry). Furthermore, it picks up a negative phase under parity inversion, so it transforms nontrivially under the full Lorentz group; such particles are called pseudoscalar rather than scalar. Most mesons are pseudoscalar particles." (finally explained to a captivated Celestine by Professor Brian Cox on Wednesday 27th June 2012 )

    I am proud to have co-founded LegalBeagles in 2007

    If we have helped you we'd appreciate it if you can leave a review on our Trust Pilot page

    If you wish to book an appointment with me to discuss your credit agreement, please email kate@legalbeaglesgroup. com

    Comment


    • #3
      Re: 10 things you should do to a new PC before connecting it to the Internet

      I simply changed my keyboard. Works great.


      Comment


      • #4
        Re: 10 things you should do to a new PC before connecting it to the Internet

        Wi-Fi security: A Guide for the Public - ICO


        Advice from ICO about securing wireless networks.
        "Family means that no one gets forgotten or left behind"
        (quote from David Ogden Stiers)

        Comment

        View our Terms and Conditions

        LegalBeagles Group uses cookies to enhance your browsing experience and to create a secure and effective website. By using this website, you are consenting to such use.To find out more and learn how to manage cookies please read our Cookie and Privacy Policy.

        If you would like to opt in, or out, of receiving news and marketing from LegalBeagles Group Ltd you can amend your settings at any time here.


        If you would like to cancel your registration please Contact Us. We will delete your user details on request, however, any previously posted user content will remain on the site with your username removed and 'Guest' inserted.
        Working...
        X